Edito
Voila voila, je refais mon infra…
Et j'ai donc envie de participer a une oeuvre commune :
Antoine.
Pub
Désolé de vous incommoder avec cela, c'est un mal aujourd'hui nécessaire. Je le souhaite juste utile, on verra.
Différences
Cette page vous donne les différences entre la révision choisie et la version actuelle de la page.
|
docs:linuxeries:modification_en_live_du_mode_video [2014/03/26 16:15] adlp PAGE NON VALIDE |
docs:linuxeries:modification_en_live_du_mode_video [2014/03/26 16:15] (version actuelle) adlp |
||
|---|---|---|---|
| Ligne 1: | Ligne 1: | ||
| + | Page brouillon, et ca se voit ;) | ||
| + | |||
| + | cf ca : [[http://blog.developpez.com/rsharp/p11076/linux/ubuntu_ajout_d_un_mode_d_affichage_non_l]] voila comment jouer avec les modes | ||
| + | |||
| + | <xtermrtf> | ||
| + | adlp@RBS-ADLP-LNX:/tmp$ xrandr | ||
| + | |||
| + | adlp@RBS-ADLP-LNX:/tmp$ xrandr --delmode VGA1 1280x1024 | ||
| + | |||
| + | adlp@RBS-ADLP-LNX:~$ gtf 1280 1024 60.0 | ||
| + | |||
| + | # 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz | ||
| + | Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync | ||
| + | |||
| + | |||
| + | ****** | ||
| + | # 1280x1024 @ 56.20 Hz (GTF) hsync: 59.46 kHz; pclk: 101.79 MHz | ||
| + | Modeline "1280x1024_56.20" 101.79 1280 1360 1496 1712 1024 1025 1028 1058 -HSync +Vsync | ||
| + | |||
| + | adlp@RBS-ADLP-LNX:/tmp$ xrandr --newmode *1280x1024* 101.79 1280 1360 1496 1712 1024 1025 1028 1058 -HSync +Vsync | ||
| + | X Error of failed request: BadName (named color or font does not exist) | ||
| + | Major opcode of failed request: 149 (RANDR) | ||
| + | Minor opcode of failed request: 16 (RRCreateMode) | ||
| + | Serial number of failed request: 25 | ||
| + | Current serial number in output stream: 25 | ||
| + | adlp@RBS-ADLP-LNX:/tmp$ xrandr --addmode VGA1 1280x1024 | ||
| + | adlp@RBS-ADLP-LNX:/tmp$ xrandr | ||
| + | Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192 | ||
| + | VGA1 connected (normal left inverted right x axis y axis) | ||
| + | 1360x768 59.8 | ||
| + | 1024x768 60.0 | ||
| + | 800x600 60.3 56.2 | ||
| + | 848x480 60.0 | ||
| + | 640x480 59.9 59.9 | ||
| + | 1280x1024 85.0 | ||
| + | LVDS1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 331mm x 207mm | ||
| + | 1680x1050 60.1*+ 84.9 74.9 69.9 60.0 50.1 | ||
| + | 1600x1024 60.2 | ||
| + | 1400x1050 85.0 74.8 70.0 60.0 | ||
| + | 1280x1024 85.0 75.0 60.0 | ||
| + | 1440x900 59.9 | ||
| + | 1280x960 85.0 60.0 | ||
| + | 1360x768 59.8 | ||
| + | 1152x864 100.0 85.1 85.0 75.0 75.0 70.0 60.0 | ||
| + | 1024x768 85.0 75.0 70.1 60.0 | ||
| + | 832x624 74.6 | ||
| + | 800x600 85.1 72.2 75.0 60.3 56.2 | ||
| + | 640x480 85.0 72.8 75.0 59.9 | ||
| + | 720x400 85.0 | ||
| + | 640x400 85.1 | ||
| + | 640x350 85.1 | ||
| + | DP1 disconnected (normal left inverted right x axis y axis) | ||
| + | 1280x1024_60.00 (0x17d) 108.0MHz | ||
| + | h: width 1280 start 1360 end 1496 total 1712 skew 0 clock 63.1KHz | ||
| + | v: height 1024 start 1025 end 1028 total 1060 clock 59.5Hz | ||
| + | *1280x1024* (0x17e) 108.0MHz | ||
| + | h: width 1280 start 1360 end 1496 total 1712 skew 0 clock 63.1KHz | ||
| + | v: height 1024 start 1025 end 1028 total 1060 clock 59.5Hz | ||
| + | adlp@RBS-ADLP-LNX:/tmp$ video buro | ||
| + | Activation VGA1 | ||
| + | Sync de l'ecran principal | ||
| + | Placage a droite du second ecran | ||
| + | </xtermrtf> | ||
| + | |||
| + | |||
| + | * [[http://doc.ubuntu-fr.org/xrandr|XRands Ubuntu doc]] | ||
| + | |||
| + | <xtermrtf> | ||
| + | #!/bin/sh -e | ||
| + | |||
| + | COMMAND="$1" | ||
| + | |||
| + | case $COMMAND in | ||
| + | mono) | ||
| + | echo "Desactivation ecran VGA1" | ||
| + | xrandr --output VGA1 --off | ||
| + | echo "Mode confort de l'ecran principal" | ||
| + | xrandr --output LVDS1 --mode 1680x1050 | ||
| + | ;; | ||
| + | buro) | ||
| + | echo "Activation VGA1" | ||
| + | xrandr --output VGA1 --mode 1280x1024 | ||
| + | echo "Sync de l'ecran principal" | ||
| + | xrandr --output LVDS1 --mode 1280x1024 | ||
| + | echo "Placage a droite du second ecran" | ||
| + | xrandr --output VGA1 --right-of LVDS1 | ||
| + | ;; | ||
| + | bd) | ||
| + | echo "Activation VGA1" | ||
| + | xrandr --output VGA1 --mode 1280x1024 | ||
| + | echo "Sync de l'ecran principal" | ||
| + | xrandr --output LVDS1 --mode 1280x1024 | ||
| + | echo "Memes ecrans" | ||
| + | xrandr --output VGA1 --same-as LVDS1 | ||
| + | ;; | ||
| + | *) | ||
| + | echo "" | ||
| + | echo "mono : Desactivation sortie VGA1 / Mise en mode confort de l'ecran principal" | ||
| + | echo "buro : Actication, ecran VGA1, en mode buro, sync des ecrans, mise a droite..." | ||
| + | echo "bd : Pareil que buro, sauf que les ecrans sont doubles" | ||
| + | echo "mais : Mode maison.... cf bureau en + mieux" | ||
| + | exit 1 | ||
| + | esac | ||
| + | </xtermrtf> | ||
| + | |||
| + | On peut modifier aussi la luminosite en ligne de commande, merci a http://www.commandeslinux.fr/comment-changer-la-luminosite-de-votre-encran-en-ligne-de-commande-avec-xrandr/ | ||
| + | <xtermrtf> | ||
| + | xrandr --output $(xrandr|grep ' connected '|awk '{print $1}' ) --brightness 0.9 | ||
| + | </xtermrtf> | ||
